We are approaching the launch of the Oppo Reno 11 series, which is expected to take place this month. Leaked images show a design very similar to its predecessor. Now, thanks to efficient digital chat station (DCS)We have a good idea about the specifications of the Reno 11 and 11 Pro.

Information shows that the Oppo Reno 11 series uses Qualcomm Snapdragon and MediaTek Dimensity chips similar to the Oppo Reno 10 family.

Oppo Reno 11 specifications (rumours)

Specifically, Reno 11 is expected to carry the Dimensity 8200 chipset and a 4,800 mAh battery with 67W charging on a 7.59-7.66 mm thin body and 184 grams weight. It will have a curved display with a notch for a 32-megapixel selfie camera and a triple camera setup at the back.

This includes a Sony LYT600 sensor for the main unit, an IMX355 sensor for the ultra-wide lens, and an IMX709 sensor with 2x optical zoom for the telephoto.

Oppo Reno 11 Pro specifications (rumours)

Moving on, the Reno 11 Pro will feature a 1.5K display with 120Hz refresh rate and 2160Hz PWM dimming. It will run on the basis of Snapdragon 8+ Gen 1 processor along with LPDDR5X RAM and UFS 3.1 storage.

For photography, the Reno 11 Pro will have a 32-megapixel front camera, while on the back there will be a 50-megapixel IMX890 primary camera with an 8-megapixel IMX355 ultra-wide-angle lens and optical image stabilization. 32 megapixel IMX709 2X telephoto lens.

It is expected to have a slightly smaller battery than the standard model at 4,700mAh, but this is compensated by the 80W charging speed. The device will have a thickness of approximately 8.19-8.26 mm and weigh around 190 grams. Dual speakers and X-axis motor are expected for audio and touch devices respectively. According to this DCSThere will be no Reno 11 Pro+ this time. Plans may have changed, but we haven’t heard anything official from Oppo so far.