Recently, a schematic and fake drawing of the Redmi K70 series was leaked and circulated for several days. Now new images of Redmi K70 and K70 Pro have appeared on Weibo. Similar to what we’ve seen before, these new images offer a look at the rear design of the Redmi K70 series.

Design of Redmi K70, K70 Pro

The upcoming Redmi K70, K70 Pro and K70e are said to share the same design language. In the image above, the alleged Redmi K70 can be seen in white with a triple camera setup with LED flash. The phone has a glossy finish around the edges and will reportedly have a metal frame.

The images above show the black version of the Redmi K70 Pro equipped with a 50-megapixel primary camera. The top edge of the device appears to house the microphone, IR blaster, and speaker grill. On the bottom there is the speaker grill, USB-C port, microphone and SIM card slot.

According to other reports, Redmi K70 and K70 Pro will be powered by Snapdragon 8 Gen 2 and Snapdragon 8 Gen 3 chipsets respectively. On the other hand, it is reported that the Redmi K70e will be powered by the upcoming Dimensity 8300 chipset. Both devices will feature flat-design OLED panels. The K70 is said to support 1.5K resolution, while the Pro variant is said to offer 2K resolution.

It is reported that the Redmi K70 series will be equipped with HyperOS-based Android 14. While the K70 has a 5,000mAh battery with 120W fast charging, the Pro model will have a 5,120mAh battery with 120W fast charging. On the other hand, K70e will be powered by a 5,500mAh battery with 90W charging. As for the launch, the K70 line is expected to be released by the end of November.