May 3, 2025
Gadget

7 Common Myths About Router Placement and How It Really Works

  • November 4, 2024
  • 0

As reported 24 ChannelsMany tricks allow you to improve the Wi-Fi signal in your home. But there are many myths that need to be clarified. Myth: Routers work

7 Common Myths About Router Placement and How It Really Works

As reported 24 ChannelsMany tricks allow you to improve the Wi-Fi signal in your home. But there are many myths that need to be clarified.

Placing your router in a corner may make your living space look tidier, but it may limit signal range. Routers work best when placed in a central location where their signals can radiate in all directions.

In multi-story buildings, switching to a cellular network with strategically placed nodes (mesh system) throughout the building can improve coverage. However, one of the best solutions would be to mount the router on the wall in the room so that it is located approximately in the middle of the entire area of ​​\u200b\u200bthe apartment.

Placing your router on the ground may seem practical, but it limits the spread of your Wi-Fi signal as signals travel both outward and downward. Placing the router on a bookshelf or table can help spread the signal further without being absorbed by floor materials.

Glass surfaces can scatter or reflect signals, resulting in poor communication in the room. Additionally, sunlight can overheat the router, reducing its performance. So in practice, a shaded area without materials that can reflect the signal would be the best solution.

Placing the router next to other equipment is practically not the best solution. The fact is that many devices interfere with Wi-Fi signals, especially those operating on the same 2.4 GHz frequency.

To avoid interference, place the router at least three meters away from other electronic devices, or as far away as possible in your location.

Surrounding the router with large objects such as a sofa or bookshelf may block Wi-Fi signals. For optimal performance, remove large objects from around the router or elevate the router to allow signals to pass through obstacles.

Placing the router in the basement or attic can seriously limit Wi-Fi coverage in the rest of the house. Use a cellular network or signal repeater to improve coverage in these areas. This approach will increase connectivity without sacrificing performance on other floors.

Water absorbs and weakens Wi-Fi signals. If your router is near an aquarium, kitchen sink, or bathroom, move it to another location for a more stable connection. This placement also prevents potential damage from accidental moisture. That’s why glazed window sills and pots that need watering are not the best choice for a router.

How to increase Wi-Fi signal strength

Now that these myths have been debunked, it’s easier to determine the ideal location for your router. But optimal placement is only the beginning. Regularly updating your router’s firmware, using mesh networks or repeaters when necessary, and using high-gain antennas can further improve your Wi-Fi quality.

Source: 24 Tv

Leave a Reply

Your email address will not be published. Required fields are marked *