Nowadays, TVs do much more than just display DTT channels. And within a few years, Smart TVs have proven themselves in practice. control and entertainment center of our homethe ability to manage any smart home device, enjoy streaming platforms, download apps, and even interact with artificial intelligence.

However, there are times when we are only interested in Turn on TV and watch DTT channels directlywithout going through roundabout ways, without going through tedious menus and without requiring advertising. If you have an LG TV with webOS, this is something you can easily do with a simple installation. Below these lines we tell you how to do it.

How to enable your LG TV to switch directly to DTT channels

LG has greatly expanded its smart ecosystem with webOS and has introduced many features to expand our TV usage. However, when we just want to watch TV and do nothing else, Sometimes it’s annoying to encounter menus and banners that immediately block access to DTT channels (as in the past).

Image: LG

You can easily fix this in webOS, as you can set a source as the primary media when you turn on the TV. This allows you to have sources corresponding to your HDMI ports, consoles, peripherals, sound systems, etc., in addition to You can enable the ‘Live TV’ source by default To go straight to it as soon as we turn on our TV.

All we have to do is grab our remote control. Click on the ‘Login’ button or ‘Source’, usually a drawing of a wire or an arrow directed towards a rectangle (representing the television’s external connections).

When you press this button you will see all the sources connected and disconnected to your TV. You will also find an option called ‘.Home Center‘. Simply go here to change and manage the different connected sources on your television and the source showing DTT channels, which on webOS is normally ‘Live TV’.

Image: Xataka

To select it as the default startup source, simply You need to click on ‘Live TV’ and confirm that the input is selected by default (with a green check mark). If you’ve already done this, try turning the TV off and on again to see if it works. Do the same by unplugging and plugging back in the power.

This procedure is slightly different on some LG TVs. With webOS. If the menu shown to select the default source does not appear, try pressing and holding the configuration button on your remote control and then logging in. Combination of numbers 1105. Then press ‘OK’. Here you have to unlock some advanced options including ‘Strength at Default’ to be able to change the default font.

On other models the aforementioned Home Center may appear after pressing the ‘Home’ button, but you’ll need to do this. select the three vertical dots menu You can edit the options to change the default entry in the top right corner and also change the name of each source.

When you assign DTT channels as default input on your LG TV, an experience without waiting Simply in case you just want to watch TV channels without going into the menus of your software. However, you can also choose to disable the start menu directly.

Cover image | Xataka

via | AVTutku

In Xataka Smart Home | Your TV with Android TV allows you to watch all DTT channels for free and without settings: these are the advantages