Today, Connecting a television to the Internet is one of the first actions we take. from the first moment we started. With the increase of streaming platforms and content provided by apps and websites, there are many users who are taking advantage of their Smart TV’s features to enjoy all this content over their home WiFi network.

But when what we’re trying to replicate fails, there are outages, or the WiFi signal doesn’t reach well, that’s when we need to take action to find out what might happen in our connection. One solution that may work for certain situations is to change the frequency band we are connected to.

Networks with various frequencies at home

When you connect to your home Wi-Fi network, you can find two networks with the same number when you search the list of compatible networks. Again, one of them has the addition of ‘5G’ or ‘PLUS’ In your SSID (network identifier).

This happens if your Internet provider provides you with a dual-band router or more and the connection supports the 2.4 GHz and 5 GHz frequencies. , supports WiFi 5 or more among its compatible protocols, and therefore, you can see your network is split into two SSIDs.

Although it is always recommended to connect the TV to the 5GHz band, it has a weak point due to its higher data transfer rate: coverage is not that wide. This is because we use shorter waves for data transmission, so any obstacle like a wall in the house can interfere with the signal.

That way, if you have a television several floors away from where the router is and you have no other way to improve coverage at home, You may need to switch to 2.4 GHz network on TVBecause even if you lose speed, it is possible to earn extra as a signal.

If your TV is located near the router, the best thing to do is to connect to the 5 GHz network whenever it is supported. But if you still can’t detect the signal well, you may need to investigate. How much bandwidth does your TV get?and ways to extend the coverage of your WiFi network through PLCs, extenders or by creating a mesh network (WIFi network).

Connecting to the 5 GHz network is not always better

While connecting to 5 GHz network is the best solution to get more speed on your devices, not always a recommended optionbecause there are small devices in the house that do not need such speed, and in this case the only thing that matters is to have a good signal.

If we’re looking for more coverage and stability when it comes to connected speakers, sensors, alarms, appliances… 2.4 GHz is ideal. because it is better to pass sections and other obstaclesbecause these items do not require high speed and above all are generally only compatible with these networks.

On the contrary, if we want to connect a TV, computer, game console… ideal network is 5 GHz. Devices that require good network access speeds and where coverage is not so straightforward. Of course, we must not forget that if we connect devices to the 5 GHz network, it would be more convenient for them to be as close as possible to a port.