If you can read this article now, it means you have a modem and internet connection at home. When your modem was first set up, you entered a password to connect to the Wi-Fi wireless network, and you may never have changed that password. Good, but modem passwords are usually easy to crack, is this security measure enough? Of course not, that’s why if you look at the top of the modem there is a WPS button or you will see a WPS password next to it.

If you say OK, what happens when you press the WPS button, our answer is: your Wi-Fi network will be much more secure. Because with the WPS function you create a network within the network and thus make your internet connection a lot safer. This feature has been improved so much that some compatible modems and devices can now be connected with each other using NFC. Bride What is WPS, what does it do, how do you turn it on? Let’s take a closer look at the questions you’re wondering.

How do you use WPS?

• Method #1: WPS connection by entering PIN
• Method #2: WPS connection at the touch of a button
• Method #3: WPS connection with NFC

Let’s start with the basics, what is WPS?

Wi-Fi Simple Config, WPS for short, Wi-Fi Protected Setup in Turkish; first introduced in 2006 wireless network security protocol or in other words, it is a standard for network security. This system, which is present in almost all wireless Wi-Fi network modems today, allows users who have no technical knowledge to create a secure wireless home network.

So what does WPS do?

You probably still use the password on the modem or the password you created yourself on the wireless WiFi network modem you use at home. Some users even try to make their work easier. this will remove the password completely. Good, but is a simple password enough to prevent anyone in Wi-Fi range from connecting to this network?

Modem passwords are generally the easiest to crack. Because many users don’t care about the modem password. However, these passwords are the first key to your virtual privacy. This is where WPS comes into play. After activating the WPS function of your modem, even someone who knows your modem password needs the approval of the WPS protocol before connecting to your network. In other words, we can say that WPS is a kind of two-factor authentication of wireless Wi-Fi network modems.

What happens if I press the WPS button, do I need to enable WPS on the modem?

One of the WPS opening methods, which we will explain in detail, is located on the modem. Press the WPS button or hold for a while. In other words, when you press the WPS button on the modem, you activate this security protocol. The WPS button light will turn off when the connection is established or after a certain time.

The answer to whether WPS should be enabled in the modem depends on the user’s habits. If your Wi-Fi wireless network modem if you want it to be much safer It wouldn’t be bad if WPS was on. But if you say my password is enough for me connecting to my network; ok, even with WPS disabled.

How do you use WPS and how do you turn it on? Connection methods via WPS:

Method #1: WPS connection by entering PIN code:

Modem password and WPS PIN are different from each other. WPS PIN can be written on the back of the modem, just like the modem password, but mostly when you enter the modem interface you will see. If there is no WPS button on the modem, it is generally necessary to open the modem interface to activate this security protocol.

Enter your modem interface using a method that varies depending on the modem brand and your ISP. From the settings page Activate the WPS function and connect to the network by entering the WPS PIN while in the network area. Older modem models may require you to manually configure WPS, but many newer models come with this protocol by default.

Method #2: WPS connection by pressing the button:

We know that the lights and buttons on the modem can be confusing at times, but if you look closely, if there are any. The WPS button immediately catches the eye. The easiest and most effective way to activate the WPS security protocol is to use the WPS button on the modem.

Depending on the brand of your modem, you’ll need to press the WPS button once or hold it for a while. When the light starts flashing You connect your device to the network via the WPS security protocol. The WPS button light will turn off automatically when the connection is established or after a period of time without connection. On some models, the light may illuminate during connection.

Method #3: WPS Connection with NFC:

If you say there is no pin or button or anything technological, let’s introduce you to the near field communication method, which is NFC. NFC is actually today’s technology, not the future. but unfortunately most modem models you get from your ISP do not have such a feature.

To establish a WPS connection using the NFC method, you need an NFC-compatible modem and device. If both have this function All you need to do is move the device closer to the modem. With this approach, you are connected to your Wi-Fi wireless network modem in seconds via the WPS security protocol.

There is another WPS connection method for which we have not opened a separate topic because it is no longer in use, WPS connection via USB. Just like we used to use on computers without Wi-Fi, you would plug a USB device into your computer and connect this device to your network using the WPS protocol. But as we said, it is no longer a method that is used.

Short answers to frequently asked WPS questions:

What if WPS is enabled? If WPS is enabled, you will be connected to your network using the WPS security protocol. However not always open because in this case it would not be safe.

How to disable WPS? If you are connected with a PIN, from the modem interface, if you are connected to a button, with the same button, When connected with NFC You can also disable the WPS protocol through the modem interface. Turning the modem off and on is also an option.

Why is the WPS light not lit? With or without WPS connection WPS will be disabled after a certain time has elapsed. You can get the most accurate information about your modem model by referring to the modem’s owner’s manual or by contacting the manufacturer.

making your Wi-Fi wireless network modem much more secure. What is WPS, what does it do, how do you turn it on? We’ve covered the details you need to know about this security protocol by answering curious questions such as: Since the WPS feature is used differently in different makes and models of modems, it’s best to get information from the manufacturer .