Heating the house is, as a rule, very expensive and creates a significant burden on the family budget. 24 Channels collected a number of tips on savings. Some methods are seemingly minor changes but when applied thoroughly will definitely give you the result you want.

Pay attention to your heating system

Be sure to check your equipment even before the heating season begins. Annual maintenance of appliances will allow you to detect possible damage or other problems in advance and fix them when you do not need heating yet. Therefore, malfunctions in the midst of severe frosts will not surprise you.

Systematic Cleaning the debris and dirt accumulated in the system will positively affect the operation of the system.. You will definitely feel this in practice and see it in your accounts. Keeping your system clean and free of debris will also have an overall positive impact on the lifespan of your heating system.

If you are purchasing a new boiler, ask a specialist in the store to verify that the unit is set to maximum efficiency. Even so, you may still need to inspect it and clean it with special equipment before installation. This can be done, for example, by the technical service of the manufacturer.

Make sure your boiler is working efficiently

Read your user manual carefully to learn about all the features and benefits your boiler offers. often they may contain something to reduce gas or electricity consumption. If you have lost the manual, you can usually find it online by entering the model of the device.

Tunings play an important role in the performance and efficiency of your heating system, but many homeowners overlook this.

Use a timer or boiler programming

The timer allows you to plan when the boiler will turn on and off during the day. This allows you to set different times and temperatures, giving you more control over costs. In this way, you can, for example, set the system to turn off when you are not at home on the working day, and turn it on an hour before your return, so that the apartment has time to warm up.

Do you smell a bad smell?

A working boiler should never emit an odor. In such a case, it is necessary to immediately consult a specialist. Odor can be a sign of both internal contamination and a gas leak.

Check if the radiators are balanced

Balancing the heating system means optimizing the distribution of heated water through radiators (batteries in the rooms). This increases work efficiency and comfort while also reducing energy consumption.

Each radiator needs a certain water flow to ensure proper heat output. If unbalanced, some radiators can receive most of the hot water flow from the boilerIt causes insufficient water in other radiators. This affects the efficiency of the boiler and the comfort in your home because some rooms overheat while others remain cold.

Additionally, radiator valves with too much flow may not work properly, so you will hear loud water flow sounds as they begin to close as the room temperature rises.

To fix the problem while the radiators are still cold, you can try increasing the temperature on the thermostat to a higher level. This may help but will increase costs.

If you are installing a new boiler your system will need to be rebalanced. After installing the boiler, ask your heating engineer to confirm that your system has been balanced before paying the installation fee.

Reduce the water supply temperature in your boiler

The boiler should only be set to the highest temperature during cold winter months. Otherwise, the combi boiler will unnecessarily heat the water to very high temperatures and cause energy waste. If you heat the water in the shower and mix it with cold water, this means that some of the energy does not go anywhere.

Install the thermostat

Thermostat is a device that provides efficient and comfortable heating by regulating the temperature in the room. It controls the operation of heaters, boilers or underfloor heating, automatically turning them on or off depending on the set parameters (for example, the current temperature you set as comfortable).

How the thermostat works:

• Temperature measurement. The built-in sensor reads the current air temperature.
• Analysis of indicators. The device compares the actual temperature with the temperature set by the user.
• Management of the heating system. If the temperature is lower than the set value, the thermostat activates the heating device. If it is higher, it closes.

Consider zoning heating

In a large house, you may not need heating in all rooms, or you may be able to keep some rooms at a lower temperature than others.

Instead of a single room thermostat, you can have separate heating circuits, each with its own room thermostat. This allows you to zone the temperature in different areas of your home.

If you have a smart thermostat, you can also use smart radiator valves to create heating zones in different rooms.

Setting parts of the house you don’t use frequently, such as a spare bedroom where guests only sleep occasionally, to a lower temperature, or heating some rooms only at certain times of the day, such as an office, can help you save energy and save money.

Insulate your home

In winter, heat flows from all heated rooms to unheated attics, garages, basements and the street. Because heat moves from warmer areas to cooler areas, heat can also be lost through interior ceilings, walls, and floors, wherever there is a temperature difference.

To maintain comfort in your home, the heat lost anywhere needs to be replaced by your heating system. Therefore, you pay more for heating than you can afford.

heating your home this resists heat leakage by reducing heat flow. This will reduce your electricity bills. Find out how energy efficient your home is now and benefit from insulation services.

External insulation spoils the appearance of facades, turning our high-rise buildings into an ugly, multi-colored kaleidoscope. However, the same can be done at the stage of internal repair. Choose the right materials, install good windows and you will need less heating in winter, which will save you money.

Definitely One of the most effective ways to save on heating. But these are measures that must be properly planned and implemented before the start of the heating season.

energy efficiency

If your boiler is very old, it may have an inefficient design. In this case, you can replace it with a new one to save money in the future.

Modern boilers can consume less resources than the technologies of past years. Therefore, it makes sense to find out what consumption products of different manufacturers offer and choose the one that suits you.

Ventilate the room properly

It is better to ventilate the room for 10-15 minutes several times a day, rather than ventilate it for an hour. Thus, your home will cool down less and recover heat faster.