In large houses, and especially in those houses where we have two or more floors, using a good Internet connection can seem complicated, especially because in this type of scenario Wi-Fi repeaters are not always capable to get the results we need.

It’s not hard to understand, in fact we’re sure some of our readers have encountered this problem. Think for example two-story house that it has a router located at the bottom and that due to room layout problems it was not possible to place said router in a completely central position.

Downstairs we will have a good internet connection in almost all rooms, although it may be in the ones furthest from the router. we are forced to resort to a Wi-Fi repeater, precisely because it failed to place the router in a central position. However, if we want to reach the second floor and especially the rooms that are further, it is very likely that we will not achieve a good result with the repeater, especially if we have to overcome obstacles and sources of interference.

For this type of situation, a PLC device with a Wi-Fi repeater would undoubtedly be the way to go ideal solution, and also for any other similar scenario, such as a house with two floors and an attic (three floors in total). If in the latter we wanted to bring Internet connection to the attic, the most efficient, fastest and simplest would be a PLC device with a Wi-Fi repeater.

Why is a PLC with a Wi-Fi repeater better in these cases?

Because this solution works through electrical networks, which allows us to directly reach the area we want to cover without distance or obstacles being a problem. We have two devices in totalone that is located in the area near the router and another outlet that we will use to connect our internet connection to any corner of our home.

We put the first device in a socket near the router and the second in another socket in the room closest to our target area and that’s it. The signal will be transmitted through the electrical network to the second device and This will offer us fixed and wireless internet connectionand without the need for complex configurations.

If at any time our needs change or we decide to remodel and adjust the wiring of our home, we will not have a problem, because we will be able to change the position of the PLC device with a Wi-Fi repeater and use it again as we see fit. They offer enormous flexibilityand as we have seen, they are ideal for covering great distances and for overcoming obstacles.

In order to enjoy a high level of performance and a good experience, it is necessary to choose our Wi-Fi Repeater PLC device well, and not all models offer the same features nor can they work at the same level.

In this sense, FRITZ!Powerline 1260E is undoubtedly one of the best options which we can find because it uses three wires of an electrical circuit. In this way, two transmitters and receivers exchange data simultaneously. This improves transmission speed by up to 78% and can reach a maximum of 866 Mbps on the 5 GHz band (Wi-Fi 5) and 400 Mbps on the 2.4 GHz band (Wi-Fi 4). It also has a gigabit LAN connector.

Content offered by AVM FRIZ!