Before channel 24 He talked about how the internet would work even during a power outage. Of course, this requires the operator’s equipment to be able to work autonomously, otherwise nothing will work, but you can check this with your provider.

As for the router itself, everything is not as complicated as it seems. First of all, you need to find out what electrical voltage is required for the device to work. Most likely 9 or 12 volts: this information should be used as a starting point.

My router needs 9 volts, what should I do?

If you have an ordinary 9 volt router, in practice everything is much simpler than it seems. You can even find your old power bank fine. However, to power your router, you must first purchase a special USB DC cable.

A USB DC cable is required to connect power from the power bank to the router

Then everything is as simple as possible: connect the power from the power bank to the router, do not forget about the Internet cable, turn on the router and wait for it to boot. If the provider’s equipment runs on batteries, you will have Internet.

And if the router is 12 volts?

If the device needs 12 W for operation, you will need a power bank with a fast charging function or the ability to change the voltage. So first make sure your power bank has this feature. If you buy a battery, pay attention to this parameter.

Then the algorithm remains the same: connect the power supply, the Internet, turn on the router and take advantage of the network.