Video game controllers tend to experience a variety of problems over time, either due to rough handling, dropping them because they get wet, or due to natural wear and tear. However, users can handle several of these situations from home or without spending a lot of money.

Going to a technician can often be expensive and time-consuming, but with proper care and following some guidelines, the solution can be much easier without any knowledge.

Here are five common problems with video game controllers and how to fix them at home or on a budget.

You may be interested in:

drift

This is probably the biggest drawback of controls today, especially Joy-Con from nintendo switch, that over time begin to move in their own or opposite direction and affect the user experience.

This problem can be solved by removing the remote control, bearing in mind that this will void the warranty. If you are willing to take that risk, all you have to do is place a 1mm wide piece of cardboard under the stick. This will push the button and end the drift.

If the situation is not resolved, it will be necessary to consult a specialist, because the fault may be much bigger or the process was not carried out well and some part was wrong, so it is necessary to carefully observe where each goes to avoid this. taking risks.

Hard or sticky buttons

It’s normal for someone to spill a drink on a video game controller while hanging out with friends, which may not affect its performance, but will affect its performance by making the buttons sticky or stiff.

Over time, this situation can become a bigger problem, and in general, using the controls will not be comfortable at all. However, the solution is not difficult at all.

Using a cotton swab or cup soaked in isopropyl alcohol, clean the edges of the affected buttons, trying to keep them moist, and then wipe several times so that the liquid moves to the rest of the control so it can clean the inside. . The procedure can be repeated several times until the desired result is achieved.

Alcohol evaporates quickly, so it does not affect the device, and the process can be supplemented by the use of toothpicks or toothpicks, which helps to clean the edges.

You may be interested in:

Tire wear

With prolonged use of the control, it is very likely that the rubbers on the sticks will break or peel. For these cases, the best option is to buy silicone rubber, which will act as a protection for the buttons and provide the necessary grip for playing.

The cost of these products is usually very low and they can be obtained in large quantities or designs to suit everyone’s taste.

A stationary element

Not all mobile devices today have problems and controls, as they use a very similar charging system, in the event that Game station. So the first tip is to avoid plugging them in when you’re not using them because the battery drains faster.

for the case DualSense from PS5 They sell a device that plugs into the charging port and provides about 10 extra hours of wireless battery life without adding much weight to the controller.

control Xbox They work on batteries, so they have a different image. Using rechargeable batteries is a much cheaper option than buying a pair every month. However, there is an additional option: rechargeable batteries that are installed as usual and charged like any other device with a USB cable on the console.

Better grip

Long gaming sessions can affect the health of your hands or sometimes the grip provided by the controls is not good enough. So there are options to help improve that experience.

The Joy-Con of Georgia switches They are usually the most uncomfortable to use, so users and companies have developed handles that make it easier to maintain control and their prices are not too high, because they are not licensed products, but they do not affect the performance of the console, because they are added or removed without problems.

Continue reading: