Why special oils are needed for motor vehicles in the garden

When buying motorized equipment for giving, many users often buy consumables for it. First of all – special oils and lubricants. What to pay attention to when buying such products, the AvtoVzglyad portal understood.

Today, the market for lubricants and oils for wheeled vehicles is going through difficult times. This also applies to lubricants intended for garden machinery. And their engines, as you know, have their own peculiarities. They usually run at idle or at maximum speed. In addition, the units of power cultivators, lawn mowers, trimmers and chainsaws have air cooling and their own thermal conditions. All these aspects must be taken into account when choosing a lubricant.

Four beats operation

For starters, consider the option of garden tools with 4-stroke engines. Note that the engines of many lawnmowers and cultivators do not have an oil pump – there the lubrication cycle follows different principles. This specificity of the units requires the use of oils with a certain viscosity range. That is why it is not recommended to use lubricant for cars or even “biker” in rural technology.

As for the recommended lubricants, including the “Semi-synthetic motor oil for 4-stroke engines” of the Ruseff brand showed itself very well. It is specially designed for air-cooled engines installed on lawnmowers, mini tractors, ATVs, walk-behind tractors and even autonomous generators.

By the way, this oil is suitable for all weather conditions as it is optimized for use at low temperatures and is suitable for engines that use both leaded and unleaded petrol. The composition does not contain polymer thickeners, which means that the stability is small, which is extremely necessary for air-cooled engines. The product’s high anti-corrosion properties should also be noted, which is important for protecting parts from corrosion during periods of unit downtime.

Oils for “two-stroke”

As a rule, lawnmowers, trimmers and chainsaws are equipped with 2-stroke engines, which makes this technique more compact. But the requirements for oils are slightly different here, as they must be mixed with fuel. It is important here that no smoke or ash is formed when such a mixture is burned.

In other words, the “two-stroke” lubricant should burn as fully as possible and have a low ash content. In particular, the new universal motor oil for 2-stroke engines from the same brand Ruseff has exactly these properties. The product is made on a high quality semi-synthetic base with the addition of a balanced ash-free additive package.

As a result, the oil has a low ash content and a high combustion efficiency, which ensures stable ignition of the mixture during unit operation. It reliably protects engine parts and the exhaust system from overheating and wear, as well as from ash and carbon deposits. In addition, the lubricant mixes well with gasoline, allowing you to quickly prepare the fuel oil mixture. The composition of the product from Ruseff includes a pigment that allows you to distinguish between pure gasoline and mixed.

How to process the chain?

A separate topic is lubricants for chainsaws. In addition to the engine, they have another important unit that needs a special lubricant – this is a saw chain plus a tire (that is, a guide bar along which the saw chain slides). Therefore, only special adhesive oil may be used to lubricate these elements. For example, all-weather chain oil (photo below), made by Ruseff engineers.

The product is universal in its applicability and suitable for the lubrication of all types of saw chains, sprockets and bars. In addition, it is possible to lubricate saw chains with a variety of tool variations, be it an electric, battery or chainsaw.

This oil has a high adhesion and an optimal viscosity. As a result, you can use it economically and reliably to keep the oil film on the parts, even at the highest working speed of the saw mechanism. And this, in turn, provides reliable protection of rubbing parts from wear. It is also important to note that Ruseff chain lubricant works in a wide temperature range – from -30°С to +150°С.

Universal key

Speaking of lubricants, it is worth noting another tool that is very popular among summer residents – such a preparation as “liquid key”. Such a universal lubricant spray is often used in the maintenance of garden tools and equipment, as well as for preventive treatment and protection of their parts against corrosion. Consider, for example, the possibilities of Ruseff’s “liquid key”. Judging by the reviews in RuNet, it has turned out to be a very effective tool, I admit

that quickly restores the mobility of corroded or burnt connections, including threaded connections. The practice of its application shows that it greatly simplifies the disassembly of components and mechanisms, especially those subject to corrosion.

According to experts and specialists who have repeatedly tested Ruseff’s “liquid key” in different climatic conditions, it is not only not inferior in its effectiveness, but often exceeds some imported analogues.

At the same time, it does not have a sharp smell, which favorably distinguishes it from most analogues on our market. This universal spray is sold in compact 150 ml cans.

SUBSCRIBE FOR EXCLUSIVE CONTENT

PORTAL “AVTOVGLYAD” IN TELEGRAM