Why it is absolutely necessary to remove the wheel stud caps
- May 19, 2022
- 0
Plastic caps adorn the wheel bolts or nuts of many machines. They perform a decorative function and no cargo is not transported. However, the driver can cause some
Plastic caps adorn the wheel bolts or nuts of many machines. They perform a decorative function and no cargo is not transported. However, the driver can cause some
Usually a special puller is applied to the caps so that they can be quickly disassembled. But this tractor is easy to lose or break, and in winter it will not help. Snow-water porridge flies on the wheels, which freezes in the frost and “grabs” the cap. So much so that you need to have pliers to quickly disassemble these “decorations”. By the way, in the same way the caps are removed when mounting the tires. So they quickly lose their presentation.
Problems also arise when the driver leaks the wheel onto the track. Do not loosen the lug nuts or bolts with a standard wheel wrench until you have removed the caps. And if there is no tool at hand, such a simple act changes when changing a wheel in a complex search.
There were times when the driver simply lost patience and called a tow truck to drive service vehicle to replace the wheel. Of course it cost a lot of time and money. And the culprits were just penny details just a little “soured.”
Incidentally, such a nuisance may end in a serious accident. Even if the driver managed to get to the side of the road to drive, it may not be noticed by a person in another car and injured. It is not possible to change the wheel quickly. You’ll have to sit long, bent in three deaths, remove the plastic bolts. This makes the risk of a serious accident involving personal injury.
And if the right tools are not available, the caps have to be plucked or cut off, which is a painful process. But the reverse situation also occurs. Caps eventually weaken and begin to fly. For example, cars like Opel Astra, Skoda Yeti and even expensive Jeep are known for this. Owners who cannot accept the loss “plant” the caps on the kit. And this makes it even more difficult to disassemble them. And to avoid problems, it is better to get rid of these stupid little lotions that can cause big problems.
SUBSCRIBE FOR EXCLUSIVE CONTENT
PORTAL “AVTOVGLYAD” IN TELEGRAM
Usually a special puller is applied to the caps so that they can be quickly disassembled. But this tractor is easy to lose or break, and in winter it will not help. Snow-water porridge flies on the wheels, which freezes in the frost and “grabs” the cap. So much so that you need to have pliers to quickly disassemble these “decorations”. By the way, in the same way and remove the caps for the tire. So they quickly lose their presentation.
Problems also arise when the driver leaks the wheel onto the track. Do not loosen the lug nuts or bolts with a standard wheel wrench until you have removed the caps. And when no tools are at hand, such a simple act as changing a wheel turns into a complex quest.
There were times when the driver simply lost patience and called a tow truck to drive service vehicle to replace the wheel. The course took a lot of time and money. And the perpetrators were only penny details that are just a little “sour”.
Incidentally, such a nuisance may end in a serious accident. Even if the driver managed to get to the side of the road to drive, it may not be noticed by a person in another car and injured. It is not possible to change the wheel quickly. You’ll have to sit long, bent in three deaths, remove the plastic bolts. This makes the risk of a serious accident involving personal injury.
And if the right tools aren’t turned, caps open or cut off, and that’s a painful process. But there is a reverse situation. Caps eventually weaken and begin to fly. These are famous cars like the Opel Astra, Skoda Yeti and even Jeep Road. Owners who can not accept the loss, “planted” on the closing caps. And it is even more complicated to disassemble it. And to avoid trouble, it’s best to get rid of these stupid little gadgets that can cause a lot of trouble.
SUBSCRIBE FOR EXCLUSIVE CONTENT
PORTAL “AVTOVGLYAD” IN TELEGRAM
Source: Avto Vzglyad
I’m Sandra Torres, a passionate journalist and content creator. My specialty lies in covering the latest gadgets, trends and tech news for Div Bracket. With over 5 years of experience as a professional writer, I have built up an impressive portfolio of published works that showcase my expertise in this field.