4×4 vehicles are not included in our topic because the depth they allow is obviously greater. Even some 4×4 vehicles water depth sensing technology There is even

That’s why we are normal our passenger cars Let’s look at the depth that is most reliable for us and stay there.

What is the depth of the water passage?

For the maximum water depth, the vehicle can pass without damaging the engine or other critical parts. “water passage depth” concept exists.

This value is usually height of the air intake point and the water resistance of the electronic components.

What is the maximum wading depth for non-4×4 vehicles?

As a general rule, the safe wading depth for standard non-4×4 vehicles is the same as 4×4 must not exceed the level of the wheel hubs.

This is approx to a water depth of 10-15 cm It coincides. Water above this level can cause water to enter the engine’s air intake system, which can cause serious engine damage.

However, since many modern cars are waterproof, so is this rating It can grow up to 30 cm. How do you know what is best? Obviously from the owner’s manual of your car. But be careful not to exceed 15 cm. Let the water be there and you are somewhere else. Not worth the risk!

Why is it so important?

Water can damage and cause vehicle parts battery and fuse box It can also cause electrical components to malfunction, such as If water enters the engine’s air intake system, it creates a situation called “hydraulic lockout” that causes serious damage to the engine.

Have you decided to pass? Then you need to know what to look out for before crossing the water.

• You need to be sure what depth is available for you. Also for this a stick-like tool you can use If the depth is greater than the wheel hubs, avoid passing.
• While you’re at it, the underwater ground with mud, sand or loose stones Also check whether it is covered. Loose surfaces can cause the vehicle to slip or sink.
• Please note that if there is a current in the water, the passage will be more risky Strong currents can sweep your vehicle away.

What should you do during the transition?

• Enter the water slowly and move at a steady pace. Avoid sudden acceleration or deceleration. Do not stop the vehicle to prevent water from entering the exhaust pipe.
• engine speed keep it high.
• When the tires lose contact with the road don’t brake and simply take your foot off the accelerator, hold the steering wheel straight and wait for grip to return.
• After you get out of the water, drive a short distance and apply light pressure to dry your brakes.

Don’t forget that be careful It is always your best companion.

You can also check these: