April 25, 2025
Auto

A device made in Russia to protect used cars from corrosion

  • August 3, 2022
  • 0

Scientists at the Perm National Research Polytechnic University have developed a prototype of a mobile device that could be useful to owners of older cars. A small box

Scientists at the Perm National Research Polytechnic University have developed a prototype of a mobile device that could be useful to owners of older cars. A small box allows you to apply a protective zinc coating directly to the areas of bodywork repair.

A compact “galvanizer” should cost about 10-15 thousand rubles. It consists of a power source, a special clamp and a handle that supplies electrolyte to the sinking tip. Using the device, it is possible to apply a zinc layer with a thickness of about 35 micrometers on metal parts that have been cleaned of corrosion.

Simply put, the owner of the car must clean the rust-affected parts of the body, then work with the device created by Perm scientists, then apply a layer of putty (if any) and paint the repair site.

We would add that the electrochemical method is really the best way to protect metal from rust, as zinc is a very effective protector. Therefore, car manufacturers are trying to stamp the body of galvanized steel.

However, the specialists of the Perm Polytechnic University apparently do not know that portable “zinc coaters” have been successfully presented on the market for a long time. In addition, it is really possible to buy such a device, as well as a set of consumables for only 1000 rubles …

In general, rusty insects begin to appear on many cars in leaps and bounds in spring and summer. It is under the influence of reagents and an abundance of winter moisture that in the fall untreated chips and scratches begin to “bloom”. How to beat corrosion? Can rust stains be removed without painting? The AvtoVzglyad portal offers a number of folk methods of eliminating the “brown plague”.

A compact “galvanizer” should cost about 10-15 thousand rubles. It consists of a power source, a special clamp and a handle that supplies electrolyte to the sinking tip. Using the device, it is possible to apply a zinc layer with a thickness of about 35 micrometers on metal parts that have been cleaned of corrosion.

Simply put, the owner of the car must clean the rust-affected parts of the body, then work with the device created by Perm scientists, then apply a layer of putty (if any) and paint the repair site.

We would add that the electrochemical method is really the best way to protect metal from rust, as zinc is a very effective protector. Therefore, car manufacturers are trying to stamp the body of galvanized steel.

However, the specialists of the Perm Polytechnic University apparently do not know that portable “zinc coaters” have been successfully presented on the market for a long time. In addition, it is really possible to buy such a device, as well as a set of consumables for only 1000 rubles …

In general, rusty insects begin to appear on many cars in leaps and bounds in spring and summer. It is under the influence of reagents and an abundance of winter moisture that in the fall untreated chips and scratches begin to “bloom”. How to beat corrosion? Can rust stains be removed without painting? The AvtoVzglyad portal offers a number of folk methods of eliminating the “brown plague”.

Source: Avto Vzglyad

Leave a Reply

Your email address will not be published. Required fields are marked *

Exit mobile version