Buying a new car today has become much more difficult than it used to be. Rising prices prevent many people from buying a car, or even if they do, they are turning to second-hand. However, the second-hand market is also quite large. In fact, the cars we have are very We need to protect better. Because if the car breaks down, we can face thousands of TL in costs.

Bearing winding, a car engine failure, is perhaps one of the worst failures that can happen to you. The most important thing to do when you encounter this malfunction is to drive on the right and call roadside assistance. Because if you don’t You may incur high costs.

If you don’t look at the engine’s oil and water, what kind of bearing wrap do you come across?

First of all, bearing winding is a malfunction in the motor. Understanding this malfunction is not that difficult, but you need to act quickly. To understand why such a malfunction occurs We need to know the parts in the engine.

inside of the engine There’s a piece we call the bed. This part prevents friction of rotating parts in the engine. There are two types of these bearings in the motor. Of this; The part between the engine block and the rotating crankshaft is called the main bearing and the part between the piston rods and the crankshaft is called the sleeve bearing. Request engine temperature too high (overheating) or lack of oil causes the bearings to rub as a result of not performing their job. The main culprits of the breakdown are the falling oil level to a critical level or the engine cooling system.

How do I know if my vehicle’s engine is yellowed, what are the symptoms?

Bearing winding, which can be considered one of the biggest failures that can happen to the motor, is the first symptom is oil lamp. The car wants to tell us there’s a problem here. If we consider that the main cause of the malfunction is the lack of oil in the bearings, the oil lamp gives us the first indication.

Let’s say the oil lamp came on and you didn’t really care. This time, symptoms begin to appear in the vehicle, which can be understood during operation. At advanced levels, metallic noises emanate from the vehicle’s engine. Like “plug – knock – knock” these sounds announcing metal rubbing against metalindicates that your engine is preparing for a road of no return. If you ignore this noise coming from the vehicle and keep running the engine, the result will be You may need to build an engine from scratch.

Okay, the motorcycle bed is packed, how can we fix it?

Actually, the answer to this depends on the level at which you noticed the glitch. For example, the car is out of oil and your car has a bearing. If you notice this right away, you can solve the problem with far fewer parts to replace, but if you encounter a problem so advanced that you can hear the noise coming from inside the vehicle, levels that will burn your wallet It is quite possible that you will have to deal with high repair costs.

If your vehicle’s engine has become bedridden, you should work with a good and reliable master. Normally there is a gap too small to see between the bearing and the part. In the middle of that room oil movie occurs. Because of this extremely fine detail, it must be repaired with parts that know their job well and have not been used before.

I hope you never have such a problem with your car. Now you know about packing mattresses, which is both expensive and tedious. Remember that you are your vehicle’s first doctor. Check the vehicle’s oil and water at least once a week, you can always tell if something is wrong by listening to the sound of the vehicle.