9621 Agnes Crossing, Lake Suzanneview, New Mexico Island 84604-9295.
A good way to control the standby mode and the energy consumption it entails (and therefore on the bill… and we’ve already seen that you might be in
A good way to control the standby mode and the energy consumption it entails (and therefore on the bill… and we’ve already seen that you might be in for an unpleasant surprise) is to place an extension cord between the device in question and the device. plug. One of the household appliances that can be used for this purpose is the television: it is customary to turn the king of the living room on and off with the remote control, and with the extension cord, we eliminate phantom consumption with the stroke of a pencil. However, there are also those who do it sometimes hastily, sometimes out of carelessness and because “nothing happens in total”. sometimes we turn off the TV directly from the extension cord. Big mistake: A small act to save money can be very expensive.
When we turn on the TV, in just a few seconds, starting mechanism of operations with individual starts of its components when ordering and when the device is connected to the current.
suddenly cut off power also, doing it periodically means buying more tickets and this can cause problems with the performance of the TV initially, or even as a result of damage to one of the parts.
Although in practice we may see an extremely minimalist television reduced to a big screen, it still contains delicate components and dense circuitry to get a set that works well and works well. has an estimated useful life.
As a corollary to the previous point, this bad habit could mean that we have accelerated the wear of the electronics due to these sudden changes, or the same thing: misuse means that the components probably last less, thus shortening the life for which it was designed.
As we mentioned in the previous point, televisions have a series of on-off systems, and if we suddenly choose to do this, we’re probably not going to do it just from the TV, because it will be too. we will also turn on and off other devices connected to the same power strip.
As a result, a surge in electric current may occur, which Electrical spikes that have the potential to damage the internal components of the TV.
Like other devices such as mobile phones or computers, some firmware updates are performed automatically on smart TVs, which fixes bugs and improves their performance. maintenance operations.
Normally these operations are performed automatically when the TV is idle; so if you turn it off suddenly,stop or worse interrupt this process.
It seems obvious, but despite the convenience of the remote control (which is very good, but with the consumption it requires, it puts the device on standby), it’s worth remembering if you want to turn off the TV completely. You should do this with the on/off button integrated into the device..
If you don’t want to give up the remote control and the usefulness of doing it without losing sight of energy consumption, go with the remote first, then the extension cord.
via | Economist
On the Xataka Home Page | This is how I use smart extension cord to save on electricity bill
Source: Xatak Android
Ben Stock is a hardware enthusiast and author at Div Bracket. He provides comprehensive coverage of the latest hardware advancements, offering readers a technical and in-depth look at the newest products and trends.
