RAM memory is an essential part of any technological device because it acts as the main memory of the system and is used for this save already solved operations and instructions which the device processor will have access to retrieve when needed. In this way, the processor is prevented from repeating heavy tasks and the workload is optimized.

Results and instructions that RAM can store it will depend not only on the total amount we have installedbut also about the peculiarities of the program or application we use. In general, the more RAM we have, the greater the number of solved operations and instructions we can store in it, and the better the performance will be.

Although the above is a general rule, we must remember that even if we have a lot of RAM, this It will not be fully utilized if the program or application we use is not optimized for it.. Let’s look at this with a simple example, let’s think of Windows 11, an operating system that requires 4 GB of RAM to run, but actually requires 8 GB of RAM to run smoothly, and which works optimally in configurations with 16 GB of RAM. If we have 32 GB or more RAM, we will not notice any significant difference.

FRAME it fills and empties according to what we do with our team. So when we launch the game it is filled with key data and instructions from that game and once we close it will automatically delete all such data and instructions, allowing you to face other tasks. So it’s a type of memory that works in real time, automatically adapts to what we’re doing, and is also characterized by being unstablewhich means that when we turn off the device, it completely drains.

RAM speed and capacity

The performance of this component is determined by its capacity and speed. A larger amount of RAM not only allows us to have more applications, programs and web browser tabs open, but also determines what applications can we run Y what things we can do That’s why it’s such an important part, because it not only affects performance, but can also limit the capabilities of any device.

For example, if we have a very limited amount of RAM, it will need to be emptied and refilled with a certain frequency, in whole or in part, to adapt to the requirements of a given application or program, which will ultimately affect performance. in a negative way. If we do not have the amount of memory required by the application or program it is very likely that it will not workor do it with serious problems.

Speed is determined by the total bandwidth achieved by the RAMand this is affected by the operating frequency and bus width. Faster RAM with a more limited bus can give you a much worse result than slower memory with a larger bus. Currently, in consumer computers, the optimal value passes through a 128-bit bus, which is achieved by installing two memory modules in alternative spaces on the motherboard to enable dual channel.

Higher bandwidth allows communication between RAM and other components such as the processor, faster and done in less time. In some configurations, this memory is also used by the GPU, and in these cases, bandwidth has a huge impact on its performance, as the GPU will need to access heavier data and instructions.

FRAME can be soldered to the board or in replaceable modules. The second option is the most used in the PC world and allows us to update the mentioned component in a simple and safe way. Currently, the most used memory types are Double Data Rate, specifically in its DDR4 and DDR5 standards, and LPDDR4 and LPDDR5, aimed at the portable sector and mobile devices.