Although rooting the air conditioner, so to speak, doesn’t seem to cause any problems in the short term, in the long run it can This can cause the vehicle and the vehicle’s air conditioning to experience serious malfunctions.

on this point What should we pay attention to to use the vehicle air conditioner more efficiently? we have covered.

If we take it from the most basic; Air conditioning systems in cars operate manually or automatically.

These automatic air conditioning systems can work in two or more ways. For example, in a car with a two-way air conditioning system Different temperature settings on the sides where the driver and passenger sit Is possible.

These versatile automatic air conditioning systems not only allow for separate temperature adjustments in different parts of the car, but also cooling or heating processes evenly in the car. performs.

Coming back to our main topic; One of the biggest mistakes made when using vehicle air conditioners efficiently is turning on the air conditioning before starting the vehicle.

By switching on the ignition and then activating the air conditioning while the car is not running, the air conditioning does not work efficiently and energy is drawn from the battery. If this situation continues Over time, the battery can run out and you may be unexpectedly stranded along the way.

On the other hand, turning on the air conditioning while the car is running will allow the interior of the car to warm up or cool down better thanks to the power given to the air conditioning compressor while the engine is accelerating. In summary Operating the air conditioning without getting into the car only wastes fuel and time.

As an extra tip: if the car is quite warm, turn on the air conditioning for 25-30 seconds and open the rear windows. This allows all the warm air to be blown outside.

Another notable detail is the temperature at which the air conditioner operates.

Vehicle air conditioner run at the lowest or coldest temperatureThis allows the air conditioner to work more efficiently and also saves fuel. As temperatures rise, the heating or cooling of the air by the air conditioner causes more fuel to be burned than necessary.

Instead of setting the air conditioning to the highest setting as soon as you get into the vehicle, set it to the lowest setting after starting the vehicle. It prevents the vehicle and the air conditioning from facing possible malfunctions. Instead, the air conditioner should be turned on at a low temperature and increased gradually.

There is also the issue of turnover.

The most logical move would be to turn off the water circulation during the trip, especially if there are passengers in the back seat. Because forever, It takes the air from the front of the vehicle and sends it to the rear.

In this case, as the front part cools, the air in the back makes it warmer. In other words: an air conditioner with closed recirculation means a higher efficiency.

If you have a vehicle with a start/stop function, things change.

If you disable this function in the vehicle, This allows the air conditioner to work more efficiently, especially on hot days. In this situation, which is believed to save fuel, the air conditioner compressor stops when the vehicle stops, causing the air conditioner to operate inefficiently during heavy traffic.

Let’s get to the most important point: filters!

If the vehicle’s air filter becomes dirty, airflow problems arise. Of course, such a situation makes the air conditioner’s job even more difficult. Even if no visible problems occur, it is necessary to have the air conditioner maintained and serviced several times a year. It is very important to replace the pollen filter.

This pollen filter is a pollen filter that tries to come in from the outside. by retaining a lot of dirt such as dust, soil, pollen, plant spores and dirty smoke It helps protect against allergic diseases and bad odors.

Other content that may interest you: