It was carried out by TÜVTÜRK to determine the suitability of vehicles in traffic. vehicle inspections As a result, vehicles are reported as perfect, slightly defective, seriously defective or unsafe.

To get out of these categories perfectly, Things to do before vehicle inspection there is. Once you know what to look for in your vehicle, you can leave the inspection without a headache.

Things to do before vehicle inspection:

• First check whether there are any debts on your vehicle.
• Have an exhaust gas emission measurement carried out.
• If any equipment is missing from your vehicle, please fill it in.
• Are your brakes working properly?
• Make sure your steering is normal.
• Check your vehicle’s lighting system.
• Check if there are any problems with your windows and mirrors.
• Don’t forget to check the seat belts.
• Take good care of your tires.
• There are also criteria that LPG vehicles must meet.
• Complete your vehicle documents.
• If everything is fine, you can make your appointment.

First check whether there are any debts on your vehicle.

Before proceeding with the technical details of your vehicle, check the status of your debt. Make sure that your vehicle is not subject to any fines such as traffic fines, tax debts, OGS fines for illegal passing, etc. Otherwise the debtor vehicle inspection procedures do not start. You can also pay your debt within seconds with the Digital Tax Authorities.

Have an exhaust gas emission measurement carried out.

Both fixed and mobile From TÜVTÜRK vehicle inspection stations You must have the exhaust emissions of your vehicle measured. This test, which is carried out to measure the harmful gases that your vehicle emits into the environment, checks whether the tailpipe emissions meet certain standards.

On the pre-vehicle inspection to-do list: Unless this process is completed, your vehicle will be reported as seriously defective.

If any equipment is missing from your vehicle, please fill it in.

First aid kit, triangle reflector, fire extinguisher and spare tire are on the list of things that should be present in your vehicle. If you used one of these or if it is missing, it would be useful to fill it in Things checked during the vehicle inspection These are also included in the list.

The list of equipment that varies depending on the vehicle class can be viewed here.

Are your brakes working properly?

Checking the brakes during the inspection is a standard procedure. checking the braking system below; The braking force values ​​of the front and rear axle system, left and right wheels are checked. Between two wheels for service braking difference in braking power It must be at least 30 percent. In addition, it is checked whether the braking efficiency is at least 50 percent. The parking brake control is also included in the brake system checklist.

That’s why you need to make sure your vehicle’s braking system is solid. You may want to test the vehicle’s braking distance by pressing the brake pedal and schedule a visit to the repair shop if there are any problems. While you are ready brake fluid level You can have it checked.

Make sure your steering is normal.

During vehicle inspection The steering system is also checked. The steering wheel should be sturdy and you should be able to easily steer the vehicle in the desired direction. Before the inspection, it is useful to check if the steering has any movement, squeaks or other problems. You should not have any investigation done without resolving such issues.

Check your vehicle’s lighting system.

“What is checked during the vehicle inspection?” One of the items on the list is the lighting system. Make sure your vehicle’s front and rear lights, signals, interior lights and backup lamp are intact and working. If there is a defective lamp, you can contact the mechanic who deals with car electricity.

Check if there are any problems with your windows and mirrors.

During the vehicle inspection, the condition of the windows and mirrors is also checked. Before you go to the inspection, it is therefore useful to check whether the windows and mirrors are broken, cracked or missing. window cleaning system The fact that it is in order and that there is sufficient windshield washer water are among the factors that will attract the attention of the inspection officials.

Don’t forget to check the seat belts.

Seat belts are one of the important criteria for your safety.What should be done before the vehicle inspection? Another answer to the question. You should not go for an inspection without checking that your seat belts are complete and in good condition.

Take good care of your tires.

Worn, split, torn or cut ligaments Elements that are not accepted during the inspection. Therefore, check your tires regularly and replace them at the right time. Also keep in mind that the tread depth of the tires on passenger cars should not be less than 1.6 mm.

Moreover tires depending on vehicle speedCare is also taken to ensure that it is suitable for the load it carries. Keep this information in mind and make sure your tires meet the requirements.

There are also criteria that LPG vehicles must meet.

If your vehicle has LPG, CNG or LNG, you should know that this must be put on the license plate with a change inspection. Those who do not want to miss the vehicle inspection This detail should not be overlooked.

Complete your vehicle documents.

A document in the traffic and registration records of your vehicle chassis number is available. Make sure this number matches the number on the body of your vehicle. If your chassis number has been lost or cannot be read due to renovation, repair, accident, wear and tear or disrepair, you must obtain an originality report from the appropriate authorities.

In addition, license traffic insurance and a power of attorney (if the vehicle you are taking to the inspection is not yours) are among the other documents you must have with you when you go to the inspection.

If everything is fine, you can make your appointment.

If you’ve looked at every detail of your vehicle, seen a mechanic where necessary, and think it’s now done. appointment for car inspection You can take. You can go to the inspection stations by making an appointment online via the TÜVTÜRK website or via customer service.

Other items checked during the vehicle inspection:

• Checks are carried out such as the fuel type and the number of seats of your vehicle.
• The hood locking system is checked.
• By looking under the hood, the master brake cylinder, brake booster, brake fluid level, hoses in the engine bay, battery and battery connections, electrical installation, sealing, insulation, fluid levels, oil and fuel leaks, shock absorber connection towers are checked.
• Check the stability of the driver’s seat in the vehicle.
• Attention is paid to the heating, horn, operating and mileage indicators.
• The underside of the vehicle is checked for fluid, oil and fuel leaks.
• The condition of the bodywork and carrier parts is also checked.
• Wheel bearing clearances, tie rod ends and ball joint joints are other elements that are examined.
• The status of the rim damage is checked.
• The suitability of the wheel spaces is checked.
• The brake limiter, if present in the vehicle, is also examined.

Depending on the report you receive after the vehicle inspection, continue or repeat.

After everything is ready, you will receive a report showing the condition of your vehicle. If in the report flawless or slightly defective If it says you have successfully passed the inspection process. However seriously defective or unsafe Once the notification has been received, you can have a re-inspection carried out free of charge at the same or another station in the same district within 1 month.

Checking your vehicle for these basic points before going for the vehicle inspection, inspection process can make it more seamless. But even if you pay attention to all these issues, problems can arise that only inspection experts can detect. However, remember that taking a little precaution can prevent a lot of stress and wasted time!

Our other content on vehicles that may catch your attention: