Those who say the button should be pressed while the handbrake is applied, if the button is not pressed, The bolt teeth will wear out. claims. But this general idea, while logical, is not true. So why?

Find out How the handbrake mechanism works Let’s see what can and can’t happen when you shoot without pressing the button.

First, let’s look at the working principle of the parking brake:

Handbrake, also called parking brake; It rotates around the pin and pulls a cable connected to the brake forms (the part that provides the braking force and supports the brake pad, which is produced to compress the disc to produce it, carries the brake pad and moves around and back to the brake disc). This cable pulls on the brake and applies pressure to the rear brakes.

You can also see how the locking mechanism works in the GIF below:

When you press the button it will be released and you can unlock it. You can then release the handbrake. As you can see in the GIF below, it just makes a sound if you pull up without pressing the button. It slides into place and locks. The pin fits between the teeth, not on top of them. Wherever you pull it, the mechanism is inherently impervious to wear and tear.

By pressing the button every time your vehicle thinks you’re doing something right, you can shorten the life of other parts.

If you don’t want the handbrake mechanism to wear out, you should apply as little force as possible because the force changes, wear of the system spring it causes.

When applying the handbrake allowing the mechanism to do its own work You should allow this and use the button only when necessary. Otherwise, you can shorten the lifespan of the broadcast by half!

“But my handbrake is worn out, why?” If you say so, read on.

The main cause of wear is heat. For example, if the brake disc rotates too fast, to high temperature can cause. As car parts heat up, the chance of wear increases. The same goes for all other parts. For example, if you drive at high speed for hours, the heat will wear out your tires.

In short, wear and tear is the last thing you need to worry about when towing without pressing the handbrake button. your parking brakes without pressing the button You can withdraw with peace of mind. It does not allow wear and tear due to the mechanism.

Our other content that may interest you: