For more than a century, the automotive world has strived to push boundaries and achieve the impossible. During this trip; Such as 100, 200 or even 250 km/h turning pointAlthough speeds of up to 160,000 km/h have been reached, car manufacturers have reached 300 km/h (approximately 482 km/h) does not preferentially produce vehicles that exceed the speed limit.

So why is it that despite advances in technology, companies still maintain a speed of 300 miles per hour? does not exceed the limit? Let’s explore it together.

Air resistance is a major obstacle.

As speed increases, cars collide weather resistance also increases in proportion to the square. This means that the energy required is almost doubled, especially when accelerating from 320 km/h to 480 km/h. Because at high speeds there is almost a barrier in front of the vehicle. wall again is formed. The power required to overcome this air wall requires the engine to produce much more energy. This situation necessitates both increasing the vehicle’s engine power and improving its aerodynamic design. you

The stress level of tires increases.

At extraordinary speeds such as 480 km/h, the load falls on the tires and amount of tension reaches incredible levels. At this speed, the tearing force acting on the tires can be, for example, approximately 7 tons. This shows that tires can not only handle fast corners, but also extreme wear at high speeds.

High cooling rates are required.

Reaching an extraordinary speed of 480 km/h not only requires extraordinary engine power, but also… always It also requires effective cooling of an engine that can ensure that. Thanks to its enormous power of approximately 1,800 hp, the engine can heat up It produces intense energy and heat that can cause Advanced cooling systems are needed to manage this heat and keep the engine performing optimally. However, for these systems to work effectively, additional air intakes and exhausts are required, which can increase the vehicle’s aerodynamic drag. Therefore, engineers are forced to develop innovative design solutions that cool the engine while maintaining the vehicle’s aerodynamic efficiency.

After all, breaking the 500 km/h speed limit is not just about a powerful engine; It also requires the development of the vehicle’s aerodynamic structure, tire technology and cooling systems to meet these speeds. This is for car manufacturers cost requires more and more technology and achieving these speeds meaning It is not preferred because it does not exist.

You can check out our other content that might interest you: