If you have driven a manual transmission car before, you should know that there are 3 pedals under your foot and the leftmost of these pedals. clutch pedal you know it is. Is this pedal, which allows you to shift gears in a healthy way by separating the gearbox and the engine, one of the indispensable parts of the vehicle?

First, let’s answer our own question right away. A car with a manual transmission must have a clutch. If not, it would cause you a lot of trouble. Here’s the question we need to ask. Can we shift a car without pressing the clutch? Let’s give the short answer: Yes. In the long answer we explain why this is and what consequences it can have.

It is possible to shift gears without using the clutch. So how?

First, clutchless shifting is probably not something you prefer in everyday use. More clutch cable broken cases may be preferred. Aside from that, racers can shift gears without pressing the clutch to save time.

In fact, in theory, if everything happens perfectly, driving without a clutch is not bad, on the contrary. extends the life of components such as pressure pads. However The transaction is very risky If it is not done correctly, there is a possibility that the transmission will be broken.

How can I shift without using the clutch?

You can both raise and lower the gear without depressing the clutch pedal. To do this, first being in motion needs. The trick here is; no torque transmission between engine and transmission. So let’s see what it’s like.

• By pressing the accelerator pedal of your vehicle, you increase it to 3500 – 4000 rpm (this speed may vary per vehicle).
• Take your foot off the gas when the vehicle speed is sufficient.
• When you release the accelerator pedal, your vehicle’s engine speed and transmission will be at the same speed for a short time.
• At this point, shift your vehicle’s gear. It will be a little harder than usual, but you can shift gears without applying too much pressure.
• If you can’t shift at this point, you’ve missed the equal rotational speed. Do not forcibly damage the vehicle.
• You can do the same for downshifting. For this, instead of going to 3500 – 4000 rpm, you have to switch between 1500 – 2000 rpm. The trick here is to do the same after depressing and releasing the accelerator a bit before fully shifting.

Shifting without a clutch is definitely not recommended unless you have “no other choice”.

We’ve explained how to shift gears without needing the clutch. Even if it sounds so easy not as easy as expected I have to say. In addition, even with the slightest mistake, you can disassemble the vehicle’s transmission system. Experiencing something like this will cost you thousands of TL. It also endangers your life in traffic. For this reason, we recommend that you do not use this method “unless you have no other choice”.

Today we explained to you how to change gear without pressing the clutch pedal. If you want more content like this, write to us in the comments section.

• Sources: WikiHow, Quora, driving schools